User’s Guide for xMac™ mini Server 2H Thunderbolt™-to-PCIe® Expansion System and 1U Rack Enclosure for Mac® mini With Thunderbolt Port
A – PCIe Cards Installation Steps (continued) 7. If you are installing a card into PCIe Slot 1, remove the card from its packaging, handling the card
A – PCIe Cards Installation Steps (continued) 13. Connect one end of the supplied Thunderbolt cable to either one of the xMac mini Server 2H’s Thunde
Chapter 3 – PCIe Cards, Computer, and xMac mini Server 2H Installation StepsB – Mac mini Installation Steps (continued) 4. Insert the top cover under
A – Verify the xMac mini Server 2H is Recognized 1. Press the power button on the front panel of the xMac mini Server 2H to turn on the Mac mini. If
KNOWN ISSUESNot all PCIe Cards Will Perform at 100% Thunderbolt’s PCIe bandwidth is limited to 10 Gb/s. While many cards will operate at full performa
Safety PrecautionsPlease read this section carefully before proceeding. These precautions explain the correct and safe use of this device, thereby hel
©2013 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, Echo and xMac, are trademarks
1 Introduction and Package Contents...
Chapter 1 – Introduction and Package Contents1Congratulations on your purchase! xMac mini Server 2H is a PCIe 2.0 expansion system and 1U rackmount en
Chapter 2 – xMac mini Server 2H Description1 – USB 3.0 Port This port connects to the Mac mini through a cable attached to the front panel4 – Power In
Chapter 2 – xMac mini Server 2H Description➊➋➌➍➎1 – PCIe Slot 1 This slot accepts up to an x16 mechanical, half-length, full-height, single-width PCIe
Chapter 3 – Computer, PCIe Cards, and xMac mini Server 2H Installation StepsA – PCIe Cards Installation Steps 1. Remove the xMac mini Server 2H from
A – PCIe Cards Installation Steps (continued) 5. If you are installing a card into PCIe Slot 1, remove and set aside the screw securing its port acce
Komentarze do niniejszej Instrukcji