Sonnet-technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card Instrukcja Użytkownika Pobierz pdf (Strona 15)

Figure 45

Installation—QuickSilver 2001 and 2002 Models

Reinstall Fan Assembly and Close Computer

1. Place the fan assembly between the Encore/ST card’s heat sink

and the back panel of the computer, against the modem ﬁlter

(Figure 39). Carefully plug in the fan’s 2-pin connector to the

connector on the logic board.

2. With the back of the computer facing you, secure the fan

assembly to the back plate of the computer with the two screws

you removed previously (Figure 40).

3. Raise the side panel back into place (Figure 41).

4. Return the computer to your computing area if necessary, and

reconnect the power cord and peripheral cables to the computer.

Turn On Computer

Turn on your Power Mac; your accelerated machine should boot

normally.

QuickSilver 2001/2002

screw

Figure 39

fan

2-pin

connector

Figure 46

side panel

modem

filter

1 2 ... 10 11 12 13 14 15

Brak uwag

Sonnet-technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card Instrukcja Użytkownika Strona 15