Sonnet-technologies HARMONi G3 Processor Upgrade Card Instrukcja Użytkownika

Quick Start Guide for HARMONi G3iMac and Operating System CompatibilityThe HARMONi G3 iMac processor/FireWire upgrade is compatible only withiMac®233,

3. Reconnect all the cables to the logic board, except for the one with thumb-screws (Figure 36). Verify the connectors are plugged in securely. If ne

Quick Start Guide for HARMONi G32. Double-click the Mac OS Install icon. In the Select Destination window, clickthe Options button and click the Perfo

2Multiple Upgrade RecommendationIf you intend to perform multiple hardware upgrades to your iMac, we recom-mend that you complete the installation of

Quick Start Guide for HARMONi G33Shut Down and Open Computer1. If you have not already done so, shut down your iMac. If the computer hasbeen on for an

44. Move the cables off to the sides of the logic board/drive assembly (Figure 6).5. Locate the two screws (#2 Phillips) inside the plastic handle (Fi

Quick Start Guide for HARMONi G353. Remove the heatsink and set it down with the fins face down (Figure 11).4. While holding down the logic board/driv

4. Gently push down on the RAM module until the retainer clips snap intoplace (Figure 16).5. If there is a second RAM module installed on the reverse

Figure 22Quick Start Guide for HARMONi G35. With the tall side closest to you, install the top shield onto the processor cardshield (Figure 21); verif

5. Locate the 4-pin connector at the upper right corner of the logic board(Figure 26). Press in its locking tab, and disconnect the connector by pulli

Quick Start Guide for HARMONi G311. Verify the connectors on the adapter card and the HARMONi processor cardare aligned, then gently press down on the