Sonnet-technologies Tempo RAID133 ATA Hardware RAID Controller Card Instrukcja Użytkownika Pobierz pdf

Quick Start Guide for Tempo RAID133

You Should Have

The following items should be included in your product package:

• One Tempo RAID133 PCI Macintosh ATA Hardware RAID Controller

• Two Ultra ATA cables

• Eight screws (for mounting hard drives)

• One power cable Y-adapter

The following items may be required for installation:

• Medium Phillips screwdriver

• Small ﬂ at blade screwdriver

• Needle nose pliers

• Drive mounting brackets/carriers or drive mounting sleds (sold

separately)

• Additional power cable Y-adapters

System Requirements

The Tempo RAID133 requires the following in order to operate

in your system:

• One available PCI slot

• Two or four hard drives (depending on conﬁ guration)

• Two or four available hard drive bays (depending on

conﬁ guration)

• Mac OS 8.5 or higher (through Mac OS X Version 10.3.x)

For up-to-date information on Mac OS compatibility, please check our web site.

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.

Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.

Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: [email protected]

Sonnet Technologies, Inc., California 92618-2808 USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350

©2002 Sonnet Technologies, Inc. Revised 2003. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Tempo are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trademarks

of Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA.

QSG-TAT133R-E-B-123103

. Support Notes: We recommend you make a backup of important

information on your system’s current hard drive(s) prior to installing new

hardware or software.

When handling computer products, you must take care to prevent components

from being damaged by static electricity. Before opening your computer or

removing parts from their packages, always ground yourself first by touching a

metal part of the computer, such as a port access cover, and work in an area free

of static electricity; avoid carpeted areas. Handle the Tempo RAID133 only by its

edges, and avoid touching connector traces and component pins on PCI cards,

hard drives, and other electronic devices.

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - System Requirements

Quick Start Guide for Tempo RAID133You Should HaveThe following items should be included in your product package:• One Tempo RAID133 PCI Macintosh ATA

Strona 2 - Hardware Installation Steps

2Quick Start Guide for Tempo RAID133Installation PreparationPrior to installing the Tempo RAID133 and hard drives into your sys-tem, you should famili

Strona 3 - ATA Hardware RAID Controlle

3Quick Start Guide for Tempo RAID133 3. Conﬁ gure your hard drives’ jumpers as follows: • When installing one pair of drives to create one st

Strona 4

4Quick Start Guide for Tempo RAID133 10. Route the Ultra ATA cables to the Tempo RAID133 card; avoid the processor’s heat sink and make sure the cable

Strona 5 - Drive Formatting: Mac OS X

5Quick Start Guide for Tempo RAID133 6. Recheck the cable connections; make sure all cables are properly connected to the Tempo RAID133 and the hard

Strona 6 - Figure 14

6 3. If you have not already done so, open Disk Utility (Figure 12). Note that all attached drives appear in the Information window, regardless of be

Strona 7

7Quick Start Guide for Tempo RAID133 8. Move DIP switch 2 on the Tempo RAID133 to ON to select the striping mode (Figure 15). 9. If you removed the

Strona 8 - Figure 18

8Quick Start Guide for Tempo RAID133 17. When the Warning window appears, click the Partition button (Figure 18). If necessary, repeat steps 14–16 to

Komentarze do niniejszej Instrukcji

Brak uwag

Sonnet-technologies Tempo RAID133 ATA Hardware RAID Controller Card Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Sonnet-technologies Tempo RAID133 ATA Hardware RAID Controller Card. Sonnet Technologies Tempo RAID133 ATA Hardware RAID Controller Card User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Sonnet-technologies Tempo RAID133 ATA Hardware RAID Controller Card